byw(f,b)29-50 thru byw(f,b)29-200 vishay general semiconductor document number: 88560 revision: 07-nov-07 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 ultrafast rectifier features ? glass passivated chip junction ? ultrafast recovery time ? low switching losses, high efficiency ? low forward voltage drop ? high forward surge capability ? meets msl level 1, per j-std-020, lf maximum peak of 245 c (for to-263ab package) ? solder dip 260 c, 40 s (for to-220ac and ito-220ac package) ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications for use in high frequency rectifier of switching mode power supplies, inverters, freewheeling diodes, dc-to-dc converters, and other power switching application. mechanical data case: to-220ac, ito-220ac, to-263ab epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for consumer grade, meets jesd 201 class 1a whisker test, he3 suffix for high reliability grade (aec q101 qualified), meets jesd 201 class 2 whisker test polarity: as marked mounting torque: 10 in-lbs maximum primary characteristics i f(av) 8.0 a v rrm 50 v to 200 v i fsm 100 a t rr 25 ns v f 0.8 v t j max. 150 c case pin 2 pin 1 to-220ac byw29 series ito-220ac bywf29 series bywb29 series pin 1 pin 2 k heatsink 1 2 1 2 k pin 2 pin 1 to-263ab 1 2 maximum ratings (t c = 25 c unless otherwise noted) parameter symbol byw29-50 byw29-100 byw29-150 byw29-200 unit maximum repetitive peak reverse voltage v rrm 50 100 150 200 v maximum rms voltage v rms 35 70 105 140 v maximum dc blocking voltage v dc 50 100 150 200 v maximum average forward rectified current at t c = 105 c i f(av) 8.0 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 100 a operating and storage temperature range t j , t stg - 65 to + 150 c isolation voltage (ito-220ac only) from terminal to heatsink t = 1 min v ac 1500 v
byw(f,b)29-50 thru byw(f,b)29-200 vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88560 revision: 07-nov-07 2 note: (1) pulse test: 300 s pulse width, 1 % duty cycle note: (1) automotive grade aec q101 qualified electrical characteristics (t c = 25 c unless otherwise noted) parameter test conditions symbol byw 29-50 byw29-100 byw29-150 byw29-200 unit maximum instantaneous forward voltage (1) i f = 20 a i f = 8.0 a t j = 25 c t j = 150 c v f 1.3 0.8 v maximum dc reverse current at rated dc blocking voltage t c = 25 c t c = 100 c i r 10 500 a maximum reverse recovery time i f = 1 a, v r = 30 v, di/dt = 100 a/s, i rr = 10 % i rm t rr 25 ns typical junction capacitance 4.0 v, 1 mhz c j 45 pf thermal characteristics (t c = 25 c unless otherwise noted) parameter symbol byw bywf bywb unit typical thermal resistance fr om junction to case per leg r jc 2.5 5.5 2.5 c/w ordering information (example) package preferred p/n unit weight (g) package code base quantity delivery mode to-220ac byw29-200-e3/45 1.80 45 50/tube tube ito-220ac bywf29-200-e3/45 1.95 45 50/tube tube to-263ab bywb29-200-e3/45 1.77 45 50/tube tube to-263ab bywb29-200-e3/81 1.77 81 800/reel tape and reel to-220ac byw29-200he3/45 (1) 1.80 45 50/tube tube ito-220ac bywf29-200he3/45 (1) 1.95 45 50/tube tube to-263ab bywb29-200he3/45 (1) 1.77 45 50/tube tube to-263ab bywb29-200he3/81 (1) 1.77 81 800/reel tape and reel
byw(f,b)29-50 thru byw(f,b)29-200 vishay general semiconductor document number: 88560 revision: 07-nov-07 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 ratings and characteristics curves (t a = 25 c unless otherwise noted) figure 1. maximum forward current derating curve figure 2. maximum non-repetitive peak forward surge current figure 3. typical instantaneous forward charateristics 0 0 6 8 10 75 50 25 100 125 150 4 2 a v erage for w ard re ctified c u rrent (a) case temperat u re (c) resisti v e or ind u cti v e load 0 20 40 60 8 0 100 1 100 10 nu m b er of cycles at 50 hz peak for w ard s u rge c u rrent (a) 0.4 0.6 0. 8 1.0 1.2 0.01 0.1 10 1 100 instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) figure 4. typical reverse leakage charateristics figure 5. typical junction capacitance 60 40 100 8 0 0.01 0.1 10 1 100 percent of rated peak re v erse v oltage ( % ) instantaneo u s re v erse leakage c u rrent ( a) t j = 100 c t j = 125 c t j = 25 c 020 0.1 10 1 100 40 30 50 60 70 8 0 20 re v erse v oltage ( v ) j u nction capacitance (pf)
byw(f,b)29-50 thru byw(f,b)29-200 vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88560 revision: 07-nov-07 4 package outline dimensions in inches (millimeters) to-220ac case pi n 2 pi n 1 0.635 (16.13) 0.625 (15. 8 7) 0.415 (10.54) max. 0.154 (3.91) dia. 0.14 8 (3.74) dia. 0.113 (2. 8 7) 0.103 (2.62) 0.370 (9.40) 0.360 (9.14) pi n 12 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.037 (0.94) 0.027 (0.6 8 ) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 1.14 8 (29.16) 1.11 8 (2 8 .40) 0.560 (14.22) 0.530 (13.46) 0.110 (2.79) 0.100 (2.54) 0.350 ( 8 . 8 9) 0.330 ( 8 .3 8 ) 0.145 (3.6 8 ) 0.135 (3.43) 0.603 (15.32) 0.573 (14.55) 0.055 (1.39) 0.045 (1.14) 0.1 8 5 (4.70) 0.175 (4.44) it o -220a c pi n 1 2 0.025 (0.64) 0.015 (0.3 8 ) 0.404 (10.26) 0.3 8 4 (9.75) 0.076 (1.93) ref. 0.076 (1.93) ref. 45 ref. 0.600 (15.24) 0.5 8 0 (14.73) 0.560 (14.22) 0.530 (13.46) 0.035 (0. 8 9) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.191 (4. 8 5) 0.171 (4.35) 0.057 (1.45) 0.045 (1.14) 0.671 (17.04) 0.651 (16.54) 0.02 8 (0.71) 0.020 (0.51) 0.110 (2.79) 0.100 (2.54) 7 ref. 7 ref. 7 ref. 0.350 ( 8 . 8 9) 0.330 ( 8 .3 8 ) 0.140 (3.56) dia. 0.125 (3.17) dia. 0.135 (3.43) dia. 0.122 (3.0 8 ) dia. 0.110 (2.79) 0.100 (2.54) 0.190 (4. 8 3) 0.170 (4.32) to-263ab mo u nting pad layo u t 0.670 (17.02) 0.591 (15.00) 0.105 (2.67) 0.095 (2.41) 0.0 8 (2.032) mi n . 0.15 (3. 8 1) mi n . 0.33 ( 8 .3 8 ) mi n . 0.42 (10.66) mi n . 12 k k 0.140 (3.56) 0.110 (2.79) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.090 (2.29) 0 to 0.01 (0 to 0.254) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.190 (4. 8 3) 0.160 (4.06) 0.205 (5.20) 0.195 (4.95) 0.624 (15. 8 5) 0.591 (15.00) 0.037 (0.940) 0.027 (0.6 8 6) 0.105 (2.67) 0.095 (2.41) 0.360 (9.14) 0.320 ( 8 .13) 0.411 (10.45) 0.3 8 0 (9.65) 0.245 (6.22) mi n .
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
